>>No Irdeto files or communications allowed<<




Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2008
    Location
    4tios-Portugal
    Age
    37
    Posts
    17,323
    Thanks (Given)
    9151
    Thanks (Received)
    9814
    Rep Power
    10

    Default Gladiator SSSP CCcam




    Gladiator SSSP CCcam V1.05


    Gladiator SSSP CCcam (NewCS) V1.05








  2. #2
    Join Date
    Dec 2009
    Age
    35
    Posts
    3,651
    Thanks (Given)
    1264
    Thanks (Received)
    1054
    Rep Power
    10

    Default new gladiator_sssp_cccam V1.06

    SSSP CCCAM NEWCS


    sssp_cccam_newcs


    27-05-2010

    SSSP – Simple Serial Sharing Protocol
    =====================================

    Code:
    This Protocol defines the communication between a DVB Box and a gbox by using a RS232(serial/com/tty port) with only 4 commands to implement.
    
    
    RS232 communication settings
    ============================
    115200 8N1 (115200 Baud, 8 data bits, no parity, 1 stop bit)
    To activate add in the gbox_cfg R: { 01 } for com1, or R: { 02 } for com2
    W: and V: should be deactivated 00 00
    When developing Software you can activate thers232 debug messages by adding
    10 to the R: parameter, a example for com1 would be R: { 11 }
    
    
    Format of data
    ==============
    AB CD EF GH ....
    
    AB = Command
    CDEF = length of the data following
    GH ... = data
    
    Total length is CDEF + 3 (1 byte command + 2 bytes len)
    
    
    Command 0x means from STB to gbox
    Command Fx means from gbox to STB 
    
    
    SEND PMT = 01 (send PMT to gbox)
    --------------------------------
    01 xx xx yy yy zz zz zz zz data ....
    xx = Len
    yy = SID ( byte 2 and bytes 3 from the PMT)
    zz = PMT CRC32 (last 4 bytes in the PMT)
    Data = CAID1 (2 bytes) PID1 (2 bytes) PROVIDER1 (3 bytes) CAID2 PID2 PROVIDER2 ....
    Provider is only used in Seca and Viaccess, in other systems put 00 00 00 
    For Seca use 00 xx yy and for **acess xx yy z0
    
    On each channel change the DVB box must send the PMT first, on FTA Channels please send: 01 00 06 yy yy zz zz zz zz
    
    
    SEND ECM = 03 (send ECM to gbox)
    --------------------------------
    03 xx xx yy yy ecm_data ....
    xx = len
    yy = pid
    
    Note: Please send every ecm only once, do not send the same ecm multiple times.
    
    
    REQUESTING PIDS DATA = F1 (receive ECM pid list )
    -------------------------------------------------
    F1 xx xx pid1 pid2 pid3 ....
    xx = Len
    pidx = 2 bytes for each pid
    
    Please send me ECM data from these pids only, close all other already open.
    
    
    CW RETURN = F2 (receive ControlWords)
    -------------------------------------
    F2 00 10 cw1 (8 bytes) cw2 (8 bytes)
    
    
    Command flow on a channel change
    ================================
    1. DVB box sends PMT with command 01 on a channel change
    2. gbox sends pid list of the ecm's it can handle with command F1
    3. DVB box sends ECM's (from all pids in the pid list) with command 03
    4. gbox sends CW's with command F2
    5. As soon the gbox has success in decoding a ecm it sends again a F1 command
    with one pid only, the DVB box should close then all other pids and from 
    now on send only ecm data from that pid.
    
    After this command 03 and F2 will be repeated until a channel change.
    
    On the next channel change the DVB should close all open pids and repeat the
    above procedure.
    
    
    
    //-----------------------------------------------------------------------------------------
    //-----------------------------------------------------------------------------------------
    //-----------------------------------------------------------------------------------------
    //-----------------------------------------------------------------------------------------
    Advanced protocol
    
    cmd 01 and 03 are not enough for multi-channel.
    
    so added
    
    
    
    Advanced SSSP support = 04 (send cmd to gbox)
    --------------------------------
    04 xx xx yy yy
    xx = Len
    yy = check value ( returned )
    
    
    
    Reply Advanced SSSP support = F4 
    -------------------------------------------------
    F4 xx xx yy yy
    xx = Len
    yy = 2 bytes, returned from CMD 04
    
    
    
    
    
    
    
    SEND PMT = 05 (send PMT to gbox)
    --------------------------------
    05 xx xx aa yy yy zz zz zz zz data ....
    xx = Len
    aa = which channel, less than 10,   example 00=viewing channel, 01=pip channel, 02= timeshift, 03=recording 1, 04=recording 2,.....
    yy = SID ( byte 5 and bytes 6 from the PMT)
    zz = PMT CRC32 (last 4 bytes in the PMT)
    Data = CAID1 (2 bytes) PID1 (2 bytes) PROVIDER1 (3 bytes) CAID2 PID2 PROVIDER2 ....
    Provider is only used in Seca and Viaccess, in other systems put 00 00 00 
    For Seca use 00 xx yy and for **acess xx yy z0
    
    On each channel change the DVB box must send the PMT first, on FTA Channels please send: 05 00 07 aa yy yy zz zz zz zz
    
    
    REQUESTING PIDS DATA = F5 (receive ECM pid list )
    -------------------------------------------------
    F1 xx xx aa pid1 pid2 pid3 ....
    xx = Len
    aa = from cmd 05
    pidx = 2 bytes for each pid
    
    Please send me ECM data from these pids only, close all other already open.
    
    
    
    
    
    SEND ECM = 06 (send ECM to gbox)
    --------------------------------
    03 xx xx aa bb bb bb bb yy yy ecm_data ....
    xx = len
    aa = which channel, less than 10,   example 00=viewing channel, 01=pip channel, 02= timeshift, 03=recording 1, 04=recording 2,.....
    bb = 4bytes, tag, returned from cmd F6
    yy = pid
    
    Note: Please send every ecm only once, do not send the same ecm multiple times.
    
    
    CW RETURN = F6 (receive ControlWords)
    -------------------------------------
    F2 00 15 aa bb bb bb bb cw1 (8 bytes) cw2 (8 bytes)
    aa = which channel from cmd 06
    bb = tag 4bytes from cmd 06



    DREAMBOX 800 HD PVR_Gemini 5.0_Digi TV HR _Hub_2XSmartreader+_Total TV HR Full & Total TV SER
    DREMABOX 7000S_Gemini 4.70_Pink Full
    D-Link DSL-G684T .VS. SIEMENS WLAN dsl Gigaset SX763 .VS.SMC 7004VBR(BARRICADE)

  3. #3
    Join Date
    Apr 2009
    Posts
    8,043
    Thanks (Given)
    285
    Thanks (Received)
    4456
    Rep Power
    21

    Default Gladiator PL ver.1.07_2

    Gladiator PL ver.1.07

    inactive Fixed display of servers, small changes in the tables, as amended, buttons

  4. #4
    Join Date
    Sep 2008
    Location
    Yorkshire Born & Bred
    Posts
    35,005
    Thanks (Given)
    10569
    Thanks (Received)
    17627
    Rep Power
    10

    Default

    gladiator_sssp_cccam V1.16.rar

Similar Threads

  1. Manual Cccam
    By elgeneral in forum Receptores
    Replies: 4
    Last Post: 19-09-13, 17:24

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •