Joedenoble
21-09-08, 21:16
What's new?
From my side not so very much. My image
remains simple but effective.
- Remote control setup (see menu)
Allows you to the remote receiver to another "channel" so
you have multiple boxes next to each other can and can operate separately.
For more information about the (at your own risk) for programming
your remote and set the Dreambox, I refer you to the
Forum of the manufacturer.
1.) Dream-Taste (top) Press
2.) Solange shift (top left) Press, bis es zweimal shines.
3.) Dann following Zahlen nacheinander Press: 9 - 8-2 (und nicht vert Touch!)
Muss es dann viermal shine. Wenn es zweimal shines, einfach nochmal Mach, dann war that FB Schon entsperrt.
Nun who can Ebene chosen were:
1.), 2.) Whom oben
3.) Press following buttons: 0 to 0 - 3-1 for layer 1,
ODER 0-0 - 3-2 for layer 2,
ODER 0-0 - 3-3 for layer 3,
ODER 0-0 - 3-4 for layer 4,
Note: If this goes wrong you do nothing more remote
and give them to DMM no guarantee it!
- Samba setup. Here you can netbios name and workgroup setting.
handy if you have multiple boxes in the network have.
Then there are of course many things changed and in enigma2
improved and the skins are adapted to these changes.
If you want to place the image, it is handy to use
of the opportunities that my backup image bidding.
Go to \ \ 192.168.1.100 (replace sear your IP address) and go to \ hdd.
In the \ hdd and map 'backup' and in 'backup' another folder
'enigma2. " In that folder, you can then the entire contents of \ etc \ enigma2
place. Which is then automatically put back so that all your settings
station list and just be neatly transferred call. you're after
Placing the new image, ready and need nothing more manually
to set. At most a few plugins reinstalling.
You can also following files (with no subfolders) in all
\ hdd \ backup locations. All these files are then automatically on the
put right back after posting a new ronaldd image.
/ etc/enigma2/autotimer.xml
/ etc / CCcam.cfg
/ etc / CCcam.prio
/ etc / CCcam.channelinfo
/ etc / CCcam.providers
/ etc / keys / peer.cfg
/ etc / keys / mg_cfg
/ etc / keys / ignore.list
/ etc / keys / priority.list
/ etc / keys / replace.list
/ etc / tuxbox / config / newcamd.conf
/ etc / radegast.cfg
/ etc / samba / smb.conf
/ etc / newsreader.conf
/ etc / feed.xml
/ etc / NETcaster.conf
/ etc / fstab (if you this file in / hdd / backup places, all mounts automatically put back)
Have fun with my new image.
If you plugins have been tested on my image, which is still not in my image
available, send me than zip or tarball and I put him in the feed.
If you find bugs, I would love to hear!
Ronaldd [Only registered and activated users can see links] ([Only registered and activated users can see links])
From my side not so very much. My image
remains simple but effective.
- Remote control setup (see menu)
Allows you to the remote receiver to another "channel" so
you have multiple boxes next to each other can and can operate separately.
For more information about the (at your own risk) for programming
your remote and set the Dreambox, I refer you to the
Forum of the manufacturer.
1.) Dream-Taste (top) Press
2.) Solange shift (top left) Press, bis es zweimal shines.
3.) Dann following Zahlen nacheinander Press: 9 - 8-2 (und nicht vert Touch!)
Muss es dann viermal shine. Wenn es zweimal shines, einfach nochmal Mach, dann war that FB Schon entsperrt.
Nun who can Ebene chosen were:
1.), 2.) Whom oben
3.) Press following buttons: 0 to 0 - 3-1 for layer 1,
ODER 0-0 - 3-2 for layer 2,
ODER 0-0 - 3-3 for layer 3,
ODER 0-0 - 3-4 for layer 4,
Note: If this goes wrong you do nothing more remote
and give them to DMM no guarantee it!
- Samba setup. Here you can netbios name and workgroup setting.
handy if you have multiple boxes in the network have.
Then there are of course many things changed and in enigma2
improved and the skins are adapted to these changes.
If you want to place the image, it is handy to use
of the opportunities that my backup image bidding.
Go to \ \ 192.168.1.100 (replace sear your IP address) and go to \ hdd.
In the \ hdd and map 'backup' and in 'backup' another folder
'enigma2. " In that folder, you can then the entire contents of \ etc \ enigma2
place. Which is then automatically put back so that all your settings
station list and just be neatly transferred call. you're after
Placing the new image, ready and need nothing more manually
to set. At most a few plugins reinstalling.
You can also following files (with no subfolders) in all
\ hdd \ backup locations. All these files are then automatically on the
put right back after posting a new ronaldd image.
/ etc/enigma2/autotimer.xml
/ etc / CCcam.cfg
/ etc / CCcam.prio
/ etc / CCcam.channelinfo
/ etc / CCcam.providers
/ etc / keys / peer.cfg
/ etc / keys / mg_cfg
/ etc / keys / ignore.list
/ etc / keys / priority.list
/ etc / keys / replace.list
/ etc / tuxbox / config / newcamd.conf
/ etc / radegast.cfg
/ etc / samba / smb.conf
/ etc / newsreader.conf
/ etc / feed.xml
/ etc / NETcaster.conf
/ etc / fstab (if you this file in / hdd / backup places, all mounts automatically put back)
Have fun with my new image.
If you plugins have been tested on my image, which is still not in my image
available, send me than zip or tarball and I put him in the feed.
If you find bugs, I would love to hear!
Ronaldd [Only registered and activated users can see links] ([Only registered and activated users can see links])